Login FormClose

Chemilizer HN55

*INTERNET SPECIAL ONLY* 

chemilizer hn55 

Chemilizer (hn55)
$
219.00

Chemilizer can be used with a wide range of chemicals and fertilizers to reduce your cost. Chemilizers offer easy installation. Chemilizer is preferred over others for its mobile, non electric, compact and lightweight structure. The chemilizer is designed as a two part system comprised of a water motor and a chemical pump.

The non electric water motor functions on demand with water flow that has a fixed diaphragm. The fixed diaphragm replaces a moving piston, used by our competitors, as the driving mechanism of the water motor. Inserted into the bottom of the water motor is a positive displacement chemical pump. The chemical pump draws directly from the stock container and injects into the water line. NO chemicals enter the water motor. Choose the pump ratio that works best for you; the most common is 1-100.

***WE USE THIS CHEMILIZER IN OUR GREENHOUSES AND HIGHLY RECOMMEND IT!***

 

Chemilizer HN55 installation (part one)

Starting the Unit:

  1. Be sure chemical pump is locked into the bottom of the water motor. (1/4 turn to the right)
  2. Open valves (B) and (C)
  3. Close valve (A)
  4. Open air vent until all trapped air is released, stopping the Unit
  5. Open valve (A), then close valves (B) and (C)

Chemilizer HN55 installation (part two)

NOTE: Do not hook water motor up backward. Water must flow through motor from right to left. If necessary, crisscross hoses to accommodate setup. 

NOTE: Alternate mounting below pipe.

 

 

Chemilizer HN55
$219.00
* Pump Ratio: